NNI INC, Water Meters

NNI Inc. Online     |     home
Water Meters
Positive Displacement Water Meters

Water flows through the meter’s strainer and into the measuring chamber where it drives the piston. The hydro dynamically balanced piston oscillates around a control roller, guided by a division plate. A drive magnet transmits the motion of the piston to a driven magnet located within the hermetically sealed register. The magnet is connected to a gear train which translates the piston oscillations into volume totalization displayed on the register dial face.

ZENNER USA Positive Displacement Water Meters consist of three basic components: main case, measuring chamber and a sealed register. The main cases are contructed using C89833 Brass Alloy. Measuring Chambers are constructed of a durable synthetic polymer. Bottom plates (for meter sizes 5/8" thru 1”) are available in Bronze, Cast Iron or synthetic polymer. Registers are available as either direct read or electronic output.

ZENNER USA Positive Displacement Water Meters are engineered and manufactured to provide long-term service and operate virtually maintenance free. The precise simple design allows for part interchangeability which reduces parts inventory. The register housing may be removed without affecting water pressure or removal of the main case.

ZENNER USA Positive Displacement Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. The register includes a large odometer-type totalization display, center sweep hand (360°) test circle and low flow leak detection. All Performance Meters have electronic output capabilities for easy conversion to Automated Meter Reading. 5/8” through 1” capacities are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels. 1 1/2” and 2” registration capacities are: 100,000,000 Gallons, 10,000,000 Cubic Feet, 1,000,000 Cubic Meters, 6 odometer wheels.

ZENNER USA Positive Displacement Water Meters are tested and comply with AWWA C700 and ISO 4064 performance standards.

Customer removal of the register to obtain free water is prevented through the use of a locking device that requires a special tool, only available to water utilities.

Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes and misaligned pipes. The main case for sizes 5/8” through 1” includes built-in wrench pads.

Displacement meters are not recommended for use with fire suppression systems. (See AWWA Standard C700)
Recordall® Disc Series Meter 5/8"x3/4"
Badger Model 25
US Gallons
(Not for potable water use)
Recordall® Disc Series Meter 5/8"x3/4"
Badger Model 25
US Gallons
(Safe Drinking Water Act, certified to NSF/ANSI Standards)
5/8"x3/4" Brass Meter coupling (Lead Free NSF61)

Badger Model 25 Meter 5/8"x3/4"

5/8"x3/4" Water Meter Coupling

E-mail: nni_inc@hotmail.com
Phone: 305-687-3330
Fax: 815-366-8272
Copyright © 2001 NNI INC. All rights reserved.