|
Fire Hydrant Flow Testing |
|
|
| Hydrant Test Products - Parts & Accessories |
|
|
|
Fire Hydrant Gate Valves
|
2-1/2" Fire Hydrant Gate Valves
Straight Pattern with non-rising stem and swivel inlet. 2.5" Female Swivel NST - NH x 2.5" Male NST - NH with Red speed handle and pin lug swivel connection. Choice of Aluminum or Brads Body.
Max Operating Pressure: 175 PSI (water only) at 70°F (21°C)
Inlet: 2-1/2" Female Swivel NST (NH), Outlet 2-1/2" Male NST (NH)
Material: Body Aluminum A356-T6 or Brass
- HGV250NH-AL: 2-1/2" Aluminum Hydrant Gate Valve with Speed Handle -Red Painted with Hard Anodized Swivel- $189.50
- HGV250NH-B: 2-1/2" Brass Hydrant Gate Valve with Speed Handle Rough Brass Finish $239.95.
- HGV250NH-PB: 2-1/2" Polish Brass Hydrant Gate Valve with Speed Handle - Red Painted with Polished Swivel and Outlet - $289.95.
- HGV250NH-PC: 2-1/2" Polish Chrome Hydrant Gate Valve with Speed Handle - Red Painted with Polished Chrome Swivel and Outlet- $329.95
2-1/2" High Pressure Fire Hydrant Gate Valve
2.5” NH female swivel x 2.5” NH male gate valve with a non-rising stem is excellent for hydrant, hose, high rise standpipe, and other water control applications. There is a spinning knob on hand wheel for easy open/close, with a built in slow close safety operation. Lightweight, corrosion resistance, anodized aluminum construction with an anodized aluminum spindle. Also available with special threads. This product features a high 250 PSI pressure rating.
250 PSI working pressure rating
Dimensions: L: 6” W: 5” H: 9”, Weight: 4.5 lbs.
- HGV250NH-HHGV: 2-1/2" High Pressure Aluminum Hydrant Gate Valve with spinning knob on hand wheel Handle 250Psi - $459.95
|
--------
HGV250 NH-AL
|
HGV250 NH-AL
|
HGV250 NH-B
|
HGV250 NH-PB
|
HGV250 NH-PC
|
HGV250 NH-HHGV
|
|
|
Hydrant Flushing Discharge Elbow
|
- Elbows are rated for a working pressure of 250 PSI.
- 2½" NH/NST are avilable in both Brass, Polish Chrome and hard coat aluminum anodized to Military Specification, type 3 then powder coated for nice smooth finish.
- Storz heads are forged for maximum strength.
- Female Swivel NH/NST Inlet x Male NH/NST or Storz Outlet
- Used to re-direct water stream from hydrant. Also on pump discharge valves or suction inlets to minimize hose kinking.
45* Elbows:
H-E45B: 2½" NH/NST Rough Brass 45° Flushing Discharge Elbow $149.95
H-E45PC: 2½" NH/NST Polished Chrome 45° Flushing Discharge Elbow $189.95
30* Elbows:
H-E30AL: 2½" NH/NST Aluminum 30°Flushing Discharge Elbow $129.95
H-E30PC: 2½" NH/NST Polished Chrome 30° Discharge Elbow $189.95
H-E30-2525AL: 2½" NH/NST Aluminum 30°F swivel x 2½" Storz $218.95
H-E30-2540AL: 2½" NH/NST Aluminum 30°F swivel x 4" Storz $298.95
H-E30-2550AL: 2½" NH/NST Aluminum 30°F swivel x 5" Storz $339.95
H-E30-4040AL: 4" NH/NST Aluminum 30°F swivel x 4" Storz $345.95
H-E30-4550AL: 4½" NH/NST Aluminum 30°Fswivel x 5" Storz $429.95
|
------
H-E30AL
|
H-E30-2550AL
|
H-E30-4 550AL
|
|
|
|
|
Hydrant Flushing Strainers & Flushing Diffusers
|
1-1/2" Suction Line Strainer
Protects Hose lines or Pumps from sediments filtering into suction line The Standard Suction Strainer has a Brass Adapter fitted into a pot molded 70 durometer PVC Body and 304Stainless 30 mesh (1/64 inch holes) wire screen. with friction fit ribs.
H-ST15: 1-1/2" NST/NH wire mesh suction Line Strainer- $36.50
|
H-ST15 |
Suction Line Strainer/Diffuser
Brass/Poly Basket Strainer/Diffuser
Brass Adapter with Poly Strainer/ diffuser. Used for straining debris out of the suction line or for diffusing water out of a hydrant.
Available in size 2-1/2”
National Standard thread - NH or NST
Available in NPT, NST-NH and Storz connections
H-ST25: 2½" NST Brass/Poly Basket Strainer/ Diffuser - $69.95
H-E45BS: 2½" NST Basket Strainer/ Diffuser with Elbow: $139.95
H-E45BSV: 2½" NST Basket Strainer/ Diffuser with Elbow and Brass Hydrant Gate Valve: $328.95
Aluminum Basket Strainer/Diffuser
Lightweight 6061-T6 aluminum body with rigid stainless steel mesh. Used for straining debris out of your suction line or for diffusing water out of a hydrant.
Available in sizes 2-1/2” to 6”
National Standard thread - NH or NST or Iron Pipe thread - NPSH or SIPT
H-ST25A: 2½" Basket Strainer/ Diffuser - $145.50
H-ST30A: 3" Basket Strainer/ Diffuser - $159.50
H-ST40A: 4" Basket Strainer/ Diffuser - $168.50
H-ST45A: 4½" Basket Strainer/ Diffuser - $198.50
H-ST50A: 5" Basket Strainer/ Diffuser - $228.50
H-ST60A: 6" Basket Strainer/ Diffuser - $298.50
|
 -___-- 
H-E45BS _______________________________________H-E45BSV
____ _ _
H-ST25_______---___------------------------------------______________H-ST25A
|
|
Threaded Barrel Strainers
Barrel Strainers are easy to use. Thread on to your suction hose and place in the water. There is an eye on top of the strainer to attach a rope or cable to adjust depth.Available in 1½" to 6″ Diameters
High Performance Design
Lightweight Hardcoat Anodized
Available in NH, Storz, and Camlock connections
H-BS25: 2½" NST-NH Barrel Strainer: $155.00
|
 |
|
Hydrant Flow Nozzle
|
Inspector’s Hydrant Flow Nozzle and stream straightener:
End Connection: 2-1/2" NST/NH
Smooth Bore size: 2-1/4"
Length: 6"
2-1/2" NST x 6" Flow Nozzle straightens the stream of water at the hydrant port to get the most accurate pitot tube readings possible. This nozzle will help reduce turbulence allowing for more accurate flow readings out of Hydrants.
This all-brass nozzle is Polished chrome plated on Brass and has a 2-1/4" smooth bore ID tube delivering a constant 0.88 coefficient. Also comes with PSi-GPM flow chart on the Nozzle
H-N25A - $107.50
|
 
H-N25A |
|
UL Playpipe
|
Playpipe, 2 1/2" x 30" long with 1 1/8" tip orifice, wrapped tube, UL listed Swivel handle, red marlin trim.
- Underwriter PLAYPIPES are constructed of cast brass
- Red marlin trim and a swivel handle.
- The discharge end is supplied with Underwriters thread (2-3/16" ODM x 12 threads per inch) and the whole pipe is 30" long.
- Inlet: 2 1/2" NST with a standard 1 1/8" discharge tip (1-3/4" without tip)
H-PL118 - $379.95
|
 |
|
Pitot Accessories & Parts
|
|
Dual Read PSI-GPM Liquid Filled Gauges
- SG-100LF - 4"Dial NNI Liquid Filled Gauge 0-100Psi $74.49
- SG-160LF - 4"Dial NNI Liquid Filled Gauge 0-160Psi $74.49
- SG-200LF - 4"Dial NNI Liquid Filled Gauge 0-200Psi $69.49
- SG-300LF - 4"Dial NNI Liquid Filled Gauge 0-300Psi $74.49
- SG-060L - 2½" Dial NNI Liquid Filled Gauge 0-100Psi $34.49
- SG-100L - 2½" Dial NNI Liquid Filled Gauge 0-100Psi $34.49
- SG-160L - 2½" Dial NNI Liquid Filled Gauge 0-160Psi $34.49
- SG-200L - 2½" Dial NNI Liquid Filled Gauge 0-200Psi $36.49
- SG-300L - 2½"Dial NNI Liquid Filled Gauge 0-300Psi $36.49
- SG-500L - 2½"Dial NNI Liquid Filled Gauge 0-500Psi $36.49
- SG-250D - 2½"Dial NNI Digital Gauge 0-300Psi 1%ac.$149.49
- SG-350D - 3½"Dial NNI Digital Gauge 0-300Psi 1%ac.$229.49
Piezo/Pitot Tube Assembly:
Inner Pitot Tube for 2½" Diffusers with 1/4" Filter snubber & 3-way Bleeder Valve
Brass H-PT025A Brass - $57.95
H-PT025C Chrome - $69.95
Bleeder Valve: NNI 1/4" NPT 3 way Bleeder Ball Valve
Three-Way L- port Bleeder/Ball Valve is rated to 500 psi and the bottom port is the common port. The standard handle has 360 degree rotation and lies over the open port. When the handle is rotated 90 degrees from either port, flow is shut off to both ports. HAndle with Plastic sleeve. Available in Brass or chrome.
VAL-B3WAY025-4MFF- Brass $19.95
VAL-B3WAY025-4MFFC -Chrome Plated $24.95
Gauge Filter Snubber
1/4" MNPT x 1/4" FNPT NNI Pressure Gauge Filter Snubber Brass 3000Psi
H-PT0250S Brass: $13.95
H-PT0250S-C Chrome: 15.95
1/4" MNPT x 1/4" FNPT Adjustable Pressure Gauge Filter Snubber SS316 5800Psi
H-PT0250SS $39.95
Data sheet Pressure Gauge Filter Snubber
Inner Pitot Brass Tubes:
H-PT0150I: - 3/8" MNPT x 1/4" FNPT Inner Pitot Tube for 1½" Pipe $27.95
H-PT0375I: - 3/8" MNPT x 1/4" FNPT Inner Pitot Tube for 2½" Pipe $27.95
H-PT0375IC: same as above in Chrome $39.95
H-PT0400I: - 3/8" MNPT x 1/4" FNPT Inner Pitot Tube for 4" Pipe $39.95
|
 
Dual Read GPM-Psi Liquid Filled Gauge
 
Peizo Tube Assembly with GAuge Snubber - Brass & Chrome
 
1/4" NPT 3 way Bleeder Ball Valve
 
3/8" NPT x 1/4" Inner Pitot Tube
    
Pressure Gauge Snubber**--------Quick Connect Coupler*with Plug
|
|
Fire Hose for Hydrant Testing
|
|
2½" NST x 10' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Couplings- Yellow
HS-HOSE2.5x10 $112.95
2½" NST x 15' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Couplings- Yellow
HS-HOSE2.5x15 $169.95
2½" NST x 25' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Couplings- Yellow
HS-HOSE2.5x25 $199.95
2½" NST x 50' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Couplings- Yellow
HS-HOSE2.5x50 -$289.95
2½" NST x 100' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Couplings- White
HS-HOSE2.5x100 -$650.95
2½" STORZ x 100' Double Jacket UL Listed Hose 400Psi Working, 800Psi Test with Aluminum Storz Couplings-White
HS-HOSE2.5x100S -$755.95
4" NST x 10' Hose Yellow, 500 Psi Test Aluminum Rocker Lug Couplings
HS-HOSE4x10: $849.95
4½" NST Hose 5" x 10' Hose Yellow, 400 Psi Test Aluminum Rocker Lug Couplings
HS-HOSE4.5X10: $989.95
|
2½" NST x 15' Double Jacket UL Listed Hose
2½" NST x 25' Double Jacket UL Listed Hose
2½" NST x 25' Double Jacket UL Listed Hose
2½" NST x 50' Double Jacket Hose |
|
Hydrant Wrenches
|
Heavy Duty Adjustable Hydrant Wrenches
Features:
- For pentagon hydrant nuts up to 1-3/4". from point to flat
- Notched to fit 1 1/4". square hydrant nut Model TL-HW189
- Spanner for pin lug and rocker lug couplings 1-1/2" thru 6". Plated iron head with 7/8" plated steel handle
- Overall length 18 ".
TL-AHW: $34.85
TL-HW189: $34.50
TL-HWB: $39.50
|
TL-AHW
TL-HW189
TL-HWB
|
Ratcheting Hydrant Wrench
Features
- Save valuable time with wrench's ratchet action and quick-adjusting socket
- Adjustable, snug-fitting socket for tackling pentagon or square nuts
- Socket adjusts quickly with the thumb screw feature
- Heavy-duty construction
TL-HWFR: $209.99
|
  |
Storz Hydrant Wrench
Features
- Spanner wrenches for easy disconnecting/connecting of Storz couplings. Wrench has a long handle for added leverage, light weight material
- Tl_HWS45 is a 2-in-1 hydrant wrench that offers a spanner for the Storz® fitting and an integrated, adjustable pentagon socket for turning operating nuts
TL-HSSW 41-61: 4”-6” Single end spanner $57.99
TL-HSSW101: 2.5”-5” Single end spanner $59.99
TL-HWS45: 4"-5" Universal Hydrant Spanner $82.95
|
 |
Universal Spanner Wrench
Features
- For pin lug or rocker lug couplings 3/4" to 6"
- A gas cock shutoff is provided in the handle
- Red epoxy painted
- 11-3/4" long
TL-HS233: $29.99
|
 |
|
Digital Tachometer
|
The CHECK-LINE CDT-2000HD Combination Portable Tachometer combines the best features of both contact and non-contact models to accurately measure RPM, surface speed and length. When using the non-contact mode, rotational speed (RPM) is measured using a visible beam of light. The CDT-2000HD can be up to 24 inches away from the small piece of reflective tape that is affixed to the rotating element. In the contact operating mode, the speed is sensed by directly contacting rotating device using one of the contact adapters supplied with the instrument.
The CDT-2000HD's rugged construction, portability and outstanding features make It an ideal choice for maintenance personnel, machine operators or others in a wide variety of machinery and material handling applications.
- Measures speeds from as low as 1.00 rpm up to 99,999 rpm
- Accuracy of 0.02% with a resolution of 0.01 RPM
- Includes DAkkS Traceable calibration Certificate
H-CDT-2000HD: $295.95
|
|
1. H-QC025B (FK-109)- 1/4" Male Quick Connect with Bleed Valve- $119.50
2. H-PT0250I (FK500)- 1/4" Pitot Peizo InnerTube -$137.50
3. FD-G25 - 2½” Swivel Rubber Gasket- $2.95
|
Male Quick Connect with Bleed Valve
_______
Pitot Piezo tube
|
